26 Tấm thép không gỉ
26 gauge stainless steel sheet typically has a thickness of approximately 0.48 mm (0.0187 inch). It belongs to the thin sheet category and is commonly used in light structural, trang trí, and equipment applications.
Stainless steel sheets are available in various thicknesses, chiều rộng, lengths, and grades to suit different industrial and commercial needs.
- Sự miêu tả
26 gauge stainless steel sheet is a commonly used thin stainless steel specification in construction, chế tạo, thiết bị nhà bếp, và ứng dụng trang trí. The “gauge” system is widely used in North America, while millimeters are more common in international trade.
1. What Thickness Is 26 Máy đo thép không gỉ?
For stainless steel sheets, 26 máy đo typically corresponds to:
| Máy đo | độ dày (inch) | độ dày (mm) |
|---|---|---|
| 26 Máy đo | 0.0187 TRONG | ≈ 0.48 mm |
Ghi chú: Gauge thickness may vary slightly depending on the standard (US gauge vs manufacturer tolerance), Nhưng 0.48 mm is the commonly accepted nominal thickness for stainless steel.
2. Ứng dụng điển hình của 26 Máy đo thép không gỉ
Because it is relatively thin and lightweight, 26 gauge stainless steel sheet is often used for:
-
Tấm tường
-
Decorative trim
-
HVAC duct covers
-
Light-duty enclosures
-
Tấm ốp lưng bếp
-
Vỏ thiết bị
It is easy to bend, cắt, và hình thức, making it suitable for light fabrication projects.
3. Common Stainless Steel Sheet Thickness Range
Stainless steel sheets are available in a wide range of thicknesses. Below is a general classification:
Tấm mỏng
-
0.3 mm – 1.0 mm
-
Common gauges: 28, 26, 24, 22
Medium Thickness Sheets
-
1.0 mm – 3.0 mm
-
Common gauges: 20, 18, 16
Thick Sheets / Tấm
-
3.0 mm – 50 mm (or thicker depending on grade and production method)
4. Common Standard Sheet Sizes
Stainless steel sheets are typically supplied in standard dimensions:
| Chiều rộng (mm) | Chiều dài (mm) | Tương đương (ft) |
|---|---|---|
| 1000 | 2000 | ~3.3 × 6.6 ft |
| 1219 | 2438 | 4 × 8 ft |
| 1500 | 3000 | ~5 × 10 ft |
| 1500 | 6000 | ~5 × 20 ft |
Custom cut-to-length services are also widely available to meet specific project requirements.
5. Các loại thép không gỉ phổ biến cho 26 Gauge Sheets
Thin sheets like 26 gauge are often produced in:
-
304 / 304L – General corrosion resistance
-
316 / 316L – Enhanced corrosion resistance (marine or chemical environments)
-
430 – Magnetic, cost-effective alternative
6. Important Considerations
-
Confirm whether the gauge standard is US gauge or another system.
-
Check thickness tolerance requirements for precision projects.
-
Surface finishes such as 2B, cử nhân, chải (Số 4), or mirror may affect application suitability.
-
Thin sheets require proper handling to prevent bending or surface damage.
