1 8 Tấm thép không gỉ

1 8 Tấm thép không gỉ

1/8 Tấm thép không gỉ can be processed using multiple cutting methods, including laser cutting, cắt plasma, cắt tia nước, sự cắt xén, and CNC punching. Each method has different advantages in terms of precision, tốc độ, and cost. In modern manufacturing, laser cutting is the most commonly used method due to its high accuracy and ability to produce complex shapes with excellent edge quality.

Sự miêu tả

1/8 Tấm thép không gỉ (0.125 inch / 3.175 mm) is a commonly used medium-thin stainless steel material widely applied in machinery manufacturing, construction parts, thiết bị nhà bếp, và chế tạo công nghiệp. One of the most important processing steps for this material is cắt, and stainless steel sheets can be processed using several different cutting methods depending on thickness, precision requirements, and production scale.

Quy trình cắt phổ biến cho tấm thép không gỉ

Stainless steel sheets are mainly cut using the following industrial methods:

1. Cắt Laser

Laser cutting is one of the most widely used modern cutting methods.

Đặc trưng:

High precision and clean edges
Suitable for complex shapes and fine patterns
Biến dạng vật liệu tối thiểu
High automation and efficiency

Thích hợp cho:

1/8 tấm thép không gỉ
Thin to medium thickness plates
Precision components and decorative parts

2. Cắt plasma

Plasma cutting uses high-temperature ionized gas to melt and cut metal.

Đặc trưng:

Tốc độ cắt nhanh
Suitable for medium thickness materials
Slightly rougher edge compared to laser cutting
Cost-effective for large-scale production

Thích hợp cho:

Bộ phận kết cấu
Linh kiện công nghiệp
Medium thickness stainless steel plates

3. Cắt tia nước

Waterjet cutting uses ultra-high-pressure water mixed with abrasive materials.

Đặc trưng:

Không có vùng ảnh hưởng nhiệt (cold cutting)
No material deformation
Suitable for heat-sensitive or high-precision applications
Can cut very thick stainless steel

Thích hợp cho:

High-precision industrial parts
Aerospace and medical components
Thick stainless steel plates

4. cắt (Cắt cơ khí)

Shearing uses mechanical force to cut straight lines.

Đặc trưng:

Very fast for straight cuts
Low cost and high efficiency
Limited to simple shapes
Thích hợp cho sản xuất hàng loạt

Thích hợp cho:

Standard sheet cutting
Rectangular or square plates
Pre-processing material sizing

5. đột CNC

CNC punching uses dies to punch holes and shapes into stainless steel sheets.

Đặc trưng:

High-speed production
Suitable for repetitive hole patterns
Efficient for ventilation panels and enclosures

Thích hợp cho:

Electrical cabinets
Ventilation covers
Vỏ công nghiệp

Cutting Method Comparison

Phương pháp cắt	Độ chính xác	Tốc độ	Trị giá	Application Type
Cắt Laser	Rất cao	Trung bình	Trung bình-Cao	Bộ phận chính xác
Cắt plasma	Trung bình	Cao	Thấp–Trung bình	Bộ phận kết cấu
Cắt tia nước	Rất cao	Thấp	Cao	Special precision parts
cắt	Thấp–Trung bình	Rất cao	Thấp	Straight cuts
đột CNC	Trung bình	Cao	Trung bình	Mass production