10mm Batang Keluli Tahan Karat

Extrusion is a forming process where heated stainless steel billet is forced through a die with a specific shape under high pressure. The material flows plastically and takes the shape of the die, forming a continuous rod with uniform cross-section.

• Material is heated to a plastic deformation temperature
• High pressure pushes material through a die
• Continuous shaping into round rod form
• Cooling and straightening after forming

1. Billet Preparation

Stainless steel billets are cut and inspected to ensure uniform composition and internal quality before heating.

2. Heating Process

The billet is heated to a high temperature to improve plasticity and reduce deformation resistance during extrusion.

3. Extrusion Through Die

The heated billet is placed into an extrusion press, where a powerful hydraulic system forces it through a round die to form a 10mm rod shape.

4. Cooling and Straightening

After extrusion, the rod is cooled in a controlled manner and then straightened to ensure dimensional accuracy.

5. Kemasan Permukaan

The rod may undergo further processing such as peeling, mengisar, or polishing depending on final application requirements.

• Stable and continuous cross-section
• Sesuai untuk pengeluaran besar-besaran
• Moderate surface quality
• Keseimbangan yang baik antara kos dan prestasi
• Applicable for standard industrial sizes like 10mm

• Mechanical shafts and connectors
• Pengikat dan bolt
• Industrial equipment parts
• Construction support components
• Machined precision parts