Cara Mencegah Tepi Kuning masuk 304 Keluli Tahan Karat Semasa Pemotongan Laser
Yellowing edges are a common quality issue when cutting thin 304 stainless steel with laser equipment. Although the cut profile may remain smooth, yellow or brown discoloration along the edge often indicates excessive heat input, poor gas protection, or oxidation during processing. This problem affects both appearance and post-processing quality, especially in decorative, dapur, and precision fabrication applications.
Why Do Yellow Edges Appear on 304 Laser-Cut Parts?
304 stainless steel contains chromium and nickel, yang memberikan rintangan kakisan yang sangat baik. Namun begitu, during laser cutting, if the cutting zone is exposed to excessive heat or insufficient shielding gas, oxidation occurs rapidly. This creates yellow, brown, or slightly blue discoloration on the cut edges.
Common symptoms include:
- Yellow edge oxidation
- Brown burn marks
- Uneven edge color
- Poor surface appearance
- Difficult polishing after cutting
Main Causes of Edge Yellowing
| Cause | Kesan |
|---|---|
| Low Nitrogen Purity | Increases oxidation during cutting |
| Low Gas Pressure | Poor molten material removal |
| Excessive Laser Power | Creates overheating and discoloration |
| Slow Cutting Speed | Heat remains too long in cutting zone |
| Dirty Nozzle or Lens | Reduces cutting stability |
Solutions for Preventing Yellow Edges
1. Use High-Purity Nitrogen
Nitrogen purity should ideally be above 99.99%. High-purity gas reduces oxygen exposure and improves edge brightness.
2. Increase Gas Pressure
Proper gas pressure removes molten metal quickly and minimizes oxidation on the cut edge.
3. Optimize Laser Power
Excessive power creates unnecessary heat. Lower power with optimized settings often produces cleaner edges.
4. Increase Cutting Speed
Faster cutting reduces heat accumulation and lowers the risk of discoloration.
5. Clean Nozzles and Optical Components
Dirty nozzles or contaminated lenses can affect beam quality and cause unstable cutting conditions.
6. Regular Equipment Calibration
Maintaining proper focus and alignment improves cutting precision and reduces thermal defects.
Recommended Parameters for Cleaner Edges
| Ketebalan | kuasa | Tekanan Gas |
|---|---|---|
| 0.5 mm | 500–800W | 12–16 bar |
| 1.0 mm | 800–1200W | 14–18 bar |
| 2.0 mm | 1200–2000W | 16–20 bar |
Teda Ganghua Stainless Steel Processing Solutions
Teda Ganghua supplies high-quality 304 stainless steel plates with precision laser cutting support for industrial and commercial applications. Our professional processing team helps customers improve cutting quality and reduce defects such as yellowing, burn marks, and edge oxidation.
- Stable stainless steel inventory
- Precision cutting services
- Custom fabrication support
- Strict quality control
Explore our
plat keluli tahan karat
solutions for laser cutting projects.
Soalan Lazim
1. Is yellowing always a sign of poor cutting quality?
Bukan selalu, but it usually indicates oxidation or excessive heat during cutting.
2. Can nitrogen eliminate yellow edges completely?
High-purity nitrogen significantly reduces yellowing, but machine settings must also be optimized.
3. Does thicker material yellow less?
Generally yes, because thicker material absorbs heat more evenly than thin sheets.
4. Can polishing remove yellow edges?
ya, but preventing oxidation during cutting is more efficient than post-processing correction.
5. What is the best gas for 304 Pemotongan laser?
Nitrogen is the preferred choice for bright, oxidation-free cut edges.
