GRED
Gred 430 keluli tahan karat (UNS S43000, DALAM 1.4016) is the most widely used family of Ferritic alloys. It’s also one of the widely used “non-hardenable” stainless with good physical and mechanical characteristics, about three-quarters the ductility of low carbon strip and inferior to chrome-nickel grades; cost less than chromium-nickel stainless steels. It is known for its good corrosion resistance to numerous substances, excellent stress, dan formabiliti, coupled with practical mechanical properties.
430 stainless steel is magnetic stainless steel in the annealed condition. It can be formed using a large variety of roll forming or mild stretch-bending operations, as well as the more common drawing and bending processes.
The steel has limited weldability and should not be used in the as-welded condition for dynamic or impact loaded structures. It has excellent resistance to citric and nitric acid, sulfur gases; slightly less corrosion and heat resistance than grade 301, 302, dan 304, can be used in certain chemical applications.
PROPERTIES
- Rintangan kakisan dan pengoksidaan yang baik
- Can be readily fabricated by cold working
- Kebolehbentukan yang sangat baik
- Low costs
- Magnet
- Thermal conductivity and finish quality
CHEMICAL COMPOSITION AND PHYSICAL PROPERTIES FOR 430
| item | C% | Si% | Mn% | P% | S% | Ni% | Cr% | N% | Lain-lain |
|---|---|---|---|---|---|---|---|---|---|
| Min | — | — | — | — | — | — | 16.00 | — | — |
| Maks | 0.12 | 0.75 | 1.00 | 0.040 | 0.030 | 0.60 | 18.00 | — | — |
| item | Tensile Test | Ujian Kekerasan | Bend Test | ||||
|---|---|---|---|---|---|---|---|
| 0.2%Y.S.. | 1%Y.S.. | T.S. | DIA (%) | HRB | HV | 180∘ | |
| Min | 205 | — | 420 | 22 | — | — | |
| Maks | N/mm2 | — | N/mm2 | — | 88 | 200 | 1.0t |
APPLICATION
- Linings for dish washers
- Refrigerator cabinet panels
- Kemasan automotif
- Lashing wire
- Element Supports
- Stove trim rings
- Pengikat
- Chimney liners
- Repetition machined components
SPECIFICATIONS
- JIS G4305 – Cold-rolled Stainless Steel Plate, Sheet and Strip
- DALAM 10088-2 (1.4016) – Stainless Steel Technical delivery conditions for sheet, plate and strip of corrosion resisting steels for general purposes
RAW MATERIAL FINISHS & Saiz yang ada
| 2D | A uniform, dull silver gray finish, which results from cold rolling followed by annealing and descaling. | |||||
|---|---|---|---|---|---|---|
| Julat | 914 (3′) | 1000 | 1219 (4′) | 1250 | 1500 | 1524 (5′) |
| 0.3mm ~ 3.0mm | ◇ | ◆ | ◆ | ◆ | ◆ | ◆ |
| 30GA ~ 11GA | ◇ | ◆ | ◆ | ◆ | ◆ | ◆ |
| 0.012″ ~ 0.1196″ | ◇ | ◆ | ◆ | ◆ | ◆ | ◆ |
| 2B (Mill Finish) |
A bright, cold-rolled finish resulting in the same manner as 2D finish, except that the annealed and descaled sheet received a final light roll pass through polished rolls. This is the general-purpose cold-rolled finish that can be used, or a preliminary step to polishing. | |||||
| Julat | 914 (3′) | 1000 | 1219 (4′) | 1250 | 1500 | 1524 (5′) |
| 0.3mm ~ 3.0mm | ◇ | ◆ | ◆ | ◆ | ◆ | ◆ |
| 30GA ~ 11GA | ◇ | ◆ | ◆ | ◆ | ◆ | ◆ |
| 0.012″ ~ 0.1196″ | ◇ | ◆ | ◆ | ◆ | ◆ | ◆ |
| BA (Bright Anneal) |
A highly reflective, mirror like finish, which was produced by bright annealing under Oxygen-free atmospheric conditions following cold rolling using polished rolls. | |||||
| Julat | 914 (3′) | 1000 | 1219 (4′) | 1250 | 1500 | 1524 (5′) |
| 0.3mm ~ 2.0mm | ◇ | ◆ | ◆ | ◆ | ||
| 30GA ~ 14GA | ◇ | ◆ | ◆ | ◆ | ||
| 0.012″ ~ 0.0747″ | ◇ | ◆ | ◆ | ◆ | ||
