1500*6000mm Gegelung Gelek Panas Lembaran Gegelung Keluli Tahan Karat

Penerangan

A matt non-reflective finish produced by cold rolling followed by annealing and descaling. The dull finish may result from the pickling operation or rolling on dull rolls

A bright, moderately reflective cold rolled with the annealed and descaled coil receiving a final light pass through polished rolls. This is the general purpose cold rolled finish that can be used as is, or as a preliminary step to polishing. 2B is the most commonly used surface finish

Bright annealed is offered by many stainless steel producers, and is referred to as BA or No. 2BA. A bright annealed finish approaches a mirror-like appearance. It is produced by cold rolling, then annealing in a controlled atmosphere furnace. The final appearance is developed by a single light skin pass through a cold mill over highly polished rolls, but is also dependent on additional millwork, such as grinding the surface at an intermediate gauge. A bright annealed finish is often specified for architectural applications and for other uses where a reflective surface is desired on the as fabricated part. Beberapa “milkiness” in the finish makes a BA finish not as reflective as No. 8. Typical uses include appliance trim, komponen seni bina, alat memasak, peralatan pemprosesan makanan

No.4 finish is a general purpose polished finish widely used for restaurant equipment, shop fronts and dairy equipment. Following initial grinding with coarse abrasives, final finishing generally is done with abrasives having a particle size of approximately 120 kepada 150 mesh

Tidak. 8* selesai, the most reflective finish that is commonly produced on sheet, is obtained by polishing with successively finer abrasives and buffing extensively with very fine buffing rouges. The surface is essentially free of grit lines from preliminary grinding operations. Tidak. 8 kemasan paling banyak digunakan untuk bahagian seni bina, cermin kecil dan pemantul dan untuk plat penekan