3 16 Edelstahlstab
| Standard | ASTM,AISI,IHRE,ER,IN,AUS,BS,GB |
| Form | Runden, Quadrat, Rechteck |
| Grad | 201/202/304/309/309S/310/310S/304/304L/ 316/316L/316Ti/410/420/430 |
| Durchmesser | 1mm-300mm oder nach Bedarf |
| Länge | Nach Bedarf |
| Behältergröße | 20ft GP:5898mm(Länge)x2352mm(Breite)x2393mm(Hoch) 24-26CBM 40ft GP:12032mm(Länge)x2352mm(Breite)x2393mm(Hoch) 54CBM 40ft HC:12032mm(Länge)x2352mm(Breite)x2698mm(Hoch) 68CBM |
| Zusatzleitungen | Schweißen/Stanzen/Schneiden/Biegen/Abwickeln |
| Paketdetails | Standardmäßiges Seetüchtigkeitspaket(geschützt durch wasserfestes Papier,in Eisenblech eingewickelt, durch Stahlstangen befestigt) |
- Beschreibung
3/16 stainless steel rod is a small-diameter stainless steel round bar widely used in precision components, Verbindungselemente, medizinische Geräte, electronic parts, and light mechanical structures. In der industriellen Produktion, stainless steel rods are not only produced by extrusion, but also by hot rolling, Kaltwalzen, and forging. Different manufacturing processes significantly affect mechanical properties, Oberflächenqualität, Maßhaltigkeit, and application range.
Why Stainless Steel Rod Has Multiple Manufacturing Processes
Different production methods are used to balance cost, Stärke, Oberflächenbeschaffenheit, and precision requirements. Each process modifies the internal structure of stainless steel in a different way.
- Improve mechanical strength and toughness
- Control grain structure and internal density
- Achieve different surface quality levels
- Meet different tolerance and precision requirements
Hot Rolled Stainless Steel Rod
Hot rolling is performed at high temperature, which allows the material to be easily shaped into rods with larger deformation capacity.
- Lower cost and high production efficiency
- Good for large-scale structural applications
- Slightly rough surface finish
- Less dimensional accuracy compared to cold processing
Kaltgewalzt / Cold Drawn Stainless Steel Rod
Cold rolling or cold drawing improves precision by processing the rod at room temperature, increasing strength and surface quality.
- High dimensional accuracy and tight tolerance
- Smooth and bright surface finish
- Higher mechanical strength due to work hardening
- More suitable for precision machining parts
Forged Stainless Steel Rod
Forging applies compressive force to refine internal grain structure, significantly improving strength and impact resistance.
- Highest mechanical strength among all methods
- Ausgezeichnete Ermüdungsbeständigkeit
- Suitable for heavy-duty and high-stress applications
- More material waste and higher cost
Extruded Stainless Steel Rod
Extrusion forces heated stainless steel through a die to form a rod shape, commonly used for producing consistent cross-sections in continuous production.
- Stable cross-sectional shape
- Efficient for continuous production
- Moderate surface quality
- Widely used for standard industrial rods
Zusammenfassung des Leistungsvergleichs
| Verfahren | Oberflächenqualität | Stärke | Präzision | Kosten |
|---|---|---|---|---|
| Warmgewalzt | Niedrig | Medium | Niedrig | Niedrig |
| Cold Drawn | Hoch | Hoch | Hoch | Medium |
| Forged | Medium | Sehr hoch | Medium | Hoch |
| Extruded | Medium | Medium | Medium | Niedrig–Mittel |
Typische Anwendungen von 3/16 Edelstahlstab
- Precision mechanical pins
- Small fasteners and connectors
- Medical and dental components
- Electronic and instrumentation parts
- Light structural assemblies
Available Processing Services
Stainless steel rod Kann mit Zuschnitt geliefert werden, Wärmebehandlung, Polieren, Richten, and customized machining services according to project requirements.
FAQ
1. Why are there different production methods for stainless steel rods?
To balance cost, Präzision, Stärke, and surface quality for different applications.
2. Which process gives the highest precision?
Cold drawing provides the highest dimensional accuracy.
3. Which process gives the highest strength?
Forging provides the best mechanical strength and fatigue resistance.
4. What is the most economical process?
Hot rolling is the most cost-effective method.
5. Which process is best for precision parts?
Cold drawn stainless steel rod is best for precision machining applications.
17 Jahrelange Exporterfahrung als Lieferant
Ausreichender Lagerbestand | Verarbeitungsfabrik
Unsere Firmengründung: Der Export begann in 2006, mit 18 Jahre Erfahrung im Export; Exportiert nach über 100 Länder, mit über 800 Kumulierte Kunden. Lagerbestand: Bis zu 20,000 Tonnen
Unsere eigene Stahlverarbeitungsfabrik
Wir suchen einen Distributor oder Großhandel
Wir hoffen, langfristige Geschäfte mit qualitativ hochwertigen Kunden zu machen
Genauso wie Sie für eine gute Versorgung qualitativ hochwertige Lieferanten benötigen
Schnelle Lieferung von Edelstahllieferanten
Standardmäßiges seetüchtiges Paket aus Edelstahl
Bundle-Paket; Holzkiste,Holzpalettenpaket; Behälter oder Schüttgut; Sonderanfertigungen nach Kundenwunsch
