1 4 Edelstahlstab
| Standard | ASTM,AISI,IHRE,ER,IN,AUS,BS,GB |
| Form | Runden, Quadrat, Rechteck |
| Grad | 201/202/304/309/309S/310/310S/304/304L/ 316/316L/316Ti/410/420/430 |
| Durchmesser | 1mm-300mm oder nach Bedarf |
| Länge | Nach Bedarf |
| Behältergröße | 20ft GP:5898mm(Länge)x2352mm(Breite)x2393mm(Hoch) 24-26CBM 40ft GP:12032mm(Länge)x2352mm(Breite)x2393mm(Hoch) 54CBM 40ft HC:12032mm(Länge)x2352mm(Breite)x2698mm(Hoch) 68CBM |
| Zusatzleitungen | Schweißen/Stanzen/Schneiden/Biegen/Abwickeln |
| Paketdetails | Standardmäßiges Seetüchtigkeitspaket(geschützt durch wasserfestes Papier,in Eisenblech eingewickelt, durch Stahlstangen befestigt) |
- Beschreibung
1/4 stainless steel rod refers to a small diameter stainless steel round bar commonly used in precision components, Verbindungselemente, pins, medizinische Geräte, and small mechanical parts. Due to its small size, the processing and cutting of 1/4 inch stainless steel rod require higher precision control compared with larger bars, especially in terms of deformation, burr control, und Maßhaltigkeit.
Common Processing Methods for Stainless Steel Rod
- Cold cutting: used for short length cutting with good dimensional accuracy
- Band saw cutting: suitable for batch production and medium precision requirements
- Abrasive wheel cutting: high efficiency but may generate heat and burrs
- Laserschneiden: used for high precision and complex requirements
- CNC-Bearbeitung: for precision parts after cutting into blanks
Challenges in Cutting Small Diameter Rod
Weil 1/4 inch stainless steel rod has a small cross-section, it is more sensitive to cutting force and heat, which can easily cause deformation or surface defects if not properly controlled.
- Risk of bending during clamping and cutting
- Burr formation at cut edges
- Heat buildup affecting surface quality
- Dimensional deviation due to vibration
Precision Control in Cutting Process
- Use of high-precision fixtures to prevent bending
- Sharp cutting tools to reduce burr formation
- Controlled feed rate to avoid vibration
- Cooling or lubrication during cutting
- Post-cut deburring and surface finishing
Common Finishing After Cutting
- Deburring to remove sharp edges
- Polishing for improved surface smoothness
- Grinding for tighter dimensional accuracy
- Passivation to improve corrosion resistance
Typische Anwendungen
- Precision pins and shafts
- Fasteners and screws
- Medical and dental components
- Electronic and sensor parts
- Small mechanical assemblies
Available Processing Services
Stainless steel rod Kann mit Zuschnitt geliefert werden, Richten, Polieren, Bearbeitung, and custom length services according to customer requirements.
FAQ
1. Was ist 1/4 Edelstahlstange verwendet für?
It is mainly used for small precision parts, Verbindungselemente, and mechanical components.
2. What is the best cutting method?
Band saw and cold cutting are commonly used for stable accuracy.
3. Why does small rod deform easily during cutting?
Because the small diameter has low rigidity and is sensitive to clamping force.
4. How to reduce burrs after cutting?
Use sharp tools and perform deburring or polishing after cutting.
5. Can stainless steel rod be CNC machined?
Ja, after cutting into blanks, it is widely used in CNC machining.
17 Jahrelange Exporterfahrung als Lieferant
Ausreichender Lagerbestand | Verarbeitungsfabrik
Unsere Firmengründung: Der Export begann in 2006, mit 18 Jahre Erfahrung im Export; Exportiert nach über 100 Länder, mit über 800 Kumulierte Kunden. Lagerbestand: Bis zu 20,000 Tonnen
Unsere eigene Stahlverarbeitungsfabrik
Wir suchen einen Distributor oder Großhandel
Wir hoffen, langfristige Geschäfte mit qualitativ hochwertigen Kunden zu machen
Genauso wie Sie für eine gute Versorgung qualitativ hochwertige Lieferanten benötigen
Schnelle Lieferung von Edelstahllieferanten
Standardmäßiges seetüchtiges Paket aus Edelstahl
Bundle-Paket; Holzkiste,Holzpalettenpaket; Behälter oder Schüttgut; Sonderanfertigungen nach Kundenwunsch
