1 2 Edelstahlstab
| Standard | ASTM,AISI,IHRE,ER,IN,AUS,BS,GB |
| Form | Runden, Quadrat, Rechteck |
| Grad | 201/202/304/309/309S/310/310S/304/304L/ 316/316L/316Ti/410/420/430 |
| Durchmesser | 1mm-300mm oder nach Bedarf |
| Länge | Nach Bedarf |
| Behältergröße | 20ft GP:5898mm(Länge)x2352mm(Breite)x2393mm(Hoch) 24-26CBM 40ft GP:12032mm(Länge)x2352mm(Breite)x2393mm(Hoch) 54CBM 40ft HC:12032mm(Länge)x2352mm(Breite)x2698mm(Hoch) 68CBM |
| Zusatzleitungen | Schweißen/Stanzen/Schneiden/Biegen/Abwickeln |
| Paketdetails | Standardmäßiges Seetüchtigkeitspaket(geschützt durch wasserfestes Papier,in Eisenblech eingewickelt, durch Stahlstangen befestigt) |
- Beschreibung
1/2 stainless steel rod refers to a medium-small diameter stainless steel round bar widely used in machining, Automobilkomponenten, Verbindungselemente, shafts, und Strukturteile. One of the most important processes affecting its mechanical performance is heat treatment, which is used to improve strength, Härte, Zähigkeit, and internal structure stability.
Purpose of Heat Treatment for Stainless Steel Rod
- Improve mechanical strength and hardness
- Enhance toughness and fatigue resistance
- Relieve internal stress from rolling or drawing
- Improve machinability for precision parts
- Stabilize microstructure for long-term performance
Common Heat Treatment Processes for Stainless Steel Rod
1. Lösungsglühen
The most common heat treatment process for austenitic stainless steels such as 304 Und 316. The material is heated to a high temperature and then rapidly cooled to dissolve carbides and restore corrosion resistance.
2. Stress Relieving
Used to reduce internal stress generated during cold drawing or machining. This improves dimensional stability and reduces deformation during processing.
3. Quenching and Tempering
Commonly applied to martensitic grades such as 410 Und 420. Quenching increases hardness, while tempering improves toughness and reduces brittleness.
4. Glühen
Softens the material and improves machinability. It is often used before further cold working or precision machining.
Heat Treatment Behavior by Stainless Steel Grade
| Grade Type | Heat Treatment Response | Typical Method |
|---|---|---|
| 304 / 316 | Cannot be hardened by quenching | Solution annealing |
| 303 | Verbesserte Bearbeitbarkeit, limited heat response | Stress relief annealing |
| 410 / 420 | Can be hardened significantly | Abschrecken + tempering |
Heat Treatment Process Flow
- Raw material preparation (hot rolled or cold drawn rod)
- Heating to controlled temperature in furnace
- Holding time for uniform structure transformation
- Controlled cooling (air cooling or water quenching)
- Post-treatment straightening and inspection
Advantages After Heat Treatment
- Improved mechanical performance
- Better dimensional stability during machining
- Reduced internal stress and cracking risk
- Enhanced service life in demanding environments
Typische Anwendungen von 1/2 Edelstahlstab
- Mechanical shafts and rotating parts
- Befestigungselemente und Bolzen
- Automotive and machinery components
- Industrial equipment structures
- Precision machined parts
Available Processing Services
Stainless steel rod Kann mit Zuschnitt geliefert werden, Wärmebehandlung, Polieren, Bearbeitung, and custom length services according to engineering requirements.
FAQ
1. Why is heat treatment important for stainless steel rod?
It improves strength, stability, and machinability of the material.
2. Can all stainless steel be hardened?
NEIN, only martensitic grades like 410 Und 420 can be significantly hardened.
3. What is solution annealing?
It is a process used to restore corrosion resistance in austenitic stainless steels.
4. Does 304 stainless steel respond to quenching?
NEIN, 304 cannot be hardened by quenching.
5. What is the most common heat treatment for rods?
Solution annealing and stress relieving are the most common processes.
17 Jahrelange Exporterfahrung als Lieferant
Ausreichender Lagerbestand | Verarbeitungsfabrik
Unsere Firmengründung: Der Export begann in 2006, mit 18 Jahre Erfahrung im Export; Exportiert nach über 100 Länder, mit über 800 Kumulierte Kunden. Lagerbestand: Bis zu 20,000 Tonnen
Unsere eigene Stahlverarbeitungsfabrik
Wir suchen einen Distributor oder Großhandel
Wir hoffen, langfristige Geschäfte mit qualitativ hochwertigen Kunden zu machen
Genauso wie Sie für eine gute Versorgung qualitativ hochwertige Lieferanten benötigen
Schnelle Lieferung von Edelstahllieferanten
Standardmäßiges seetüchtiges Paket aus Edelstahl
Bundle-Paket; Holzkiste,Holzpalettenpaket; Behälter oder Schüttgut; Sonderanfertigungen nach Kundenwunsch
