1 4 Batang Keluli Tahan Karat
| Standard | ASTM,AISI,MEREKA,DIA,DALAM,DARI,BS,GB |
| bentuk | Bulat, Segi empat, Rectangle |
| Gred | 201/202/304/309/309S/310/310S/304/304L/ 316/316L/316Ti/410/420/430 |
| Diameter | 1mm-300mm atau mengikut keperluan |
| Panjang | Seperti yang dikehendaki |
| Saiz bekas | 20ft GP:5898mm(Panjang)x2352mm(Lebar)x2393mm(tinggi) 24-26CBM 40 kaki GP:12032mm(Panjang)x2352mm(Lebar)x2393mm(tinggi) 54CBM 40 kaki HC:12032mm(Panjang)x2352mm(Lebar)x2698mm(tinggi) 68CBM |
| Perkhidmatan Tambahan | Kimpalan/Menebuk/Memotong/Membengkok/Menyah |
| Butiran Pakej | Pakej standard layak laut(dilindungi oleh kertas kalis air,dibalut dengan kepingan besi, ditetapkan oleh bar keluli) |
- Penerangan
1/4 stainless steel rod refers to a small diameter stainless steel round bar commonly used in precision components, pengikat, pin, peranti perubatan, and small mechanical parts. Due to its small size, the processing and cutting of 1/4 inch stainless steel rod require higher precision control compared with larger bars, especially in terms of deformation, burr control, dan ketepatan dimensi.
Common Processing Methods for Stainless Steel Rod
- Cold cutting: used for short length cutting with good dimensional accuracy
- Band saw cutting: suitable for batch production and medium precision requirements
- Abrasive wheel cutting: high efficiency but may generate heat and burrs
- Pemotongan laser: used for high precision and complex requirements
- Pemesinan CNC: for precision parts after cutting into blanks
Challenges in Cutting Small Diameter Rod
Kerana 1/4 inch stainless steel rod has a small cross-section, it is more sensitive to cutting force and heat, which can easily cause deformation or surface defects if not properly controlled.
- Risk of bending during clamping and cutting
- Burr formation at cut edges
- Heat buildup affecting surface quality
- Dimensional deviation due to vibration
Precision Control in Cutting Process
- Use of high-precision fixtures to prevent bending
- Sharp cutting tools to reduce burr formation
- Controlled feed rate to avoid vibration
- Cooling or lubrication during cutting
- Post-cut deburring and surface finishing
Common Finishing After Cutting
- Deburring to remove sharp edges
- Polishing for improved surface smoothness
- Grinding for tighter dimensional accuracy
- Passivation to improve corrosion resistance
Aplikasi Biasa
- Precision pins and shafts
- Fasteners and screws
- Medical and dental components
- Electronic and sensor parts
- Small mechanical assemblies
Available Processing Services
Stainless steel rod can be supplied with cutting, meluruskan, menggilap, pemesinan, and custom length services according to customer requirements.
Soalan Lazim
1. Apa itu 1/4 rod keluli tahan karat digunakan untuk?
It is mainly used for small precision parts, pengikat, and mechanical components.
2. What is the best cutting method?
Band saw and cold cutting are commonly used for stable accuracy.
3. Why does small rod deform easily during cutting?
Because the small diameter has low rigidity and is sensitive to clamping force.
4. How to reduce burrs after cutting?
Use sharp tools and perform deburring or polishing after cutting.
5. Can stainless steel rod be CNC machined?
ya, after cutting into blanks, it is widely used in CNC machining.
17 Pembekal Pengalaman Eksport Bertahun
Inventori yang mencukupi | Kilang Pemprosesan
Penubuhan Syarikat Kami: Eksport bermula pada 2006, dengan 18 tahun pengalaman eksport; Dieksport ke lebih 100 negara, dengan lebih 800 pelanggan kumulatif.Inventori Gudang: Sehingga 20,000 tan
Kilang Pemprosesan Keluli Kami Sendiri
Kami Sedang Mencari Pengedar Atau Pemborong
Kami berharap dapat melakukan perniagaan jangka panjang dengan pelanggan berkualiti tinggi
Sama seperti anda memerlukan pembekal berkualiti tinggi untuk membekalkan dengan baik
Penghantaran Cepat Pembekal Keluli Tahan Karat
Pakej Standard Keluli Tahan Karat Layak Laut
pakej bundle; kes kayu,pakej palet kayu; bekas atau pukal; istimewa mengikut permintaan pelanggan
