Acero inoxidable 304 Barra redonda para construcción-Teda Ganghua Metal

Stainless steel round bars for industrial engineering

Proveedor de barras de acero inoxidable de gran diámetro.

Proveedor de barras de acero inoxidable hexagonales.

Barras redondas de acero inoxidable para ingeniería industrial.

1 4 Varilla de acero inoxidable

Estándar	ASTM,AISI,SUS,ÉL,EN,DE,Licenciatura,ES
Forma	Redondo, Cuadrado, Rectángulo
Calificación	201/202/304/309/309S/310/310S/304/304L/ 316/316L/316Ti/410/420/430
Diámetro	1mm-300 mm o según sea necesario
Longitud	Según sea necesario
Tamaño del contenedor	20pies GP:5898milímetros(Longitud)x2352mm(Ancho)x2393mm(Alto) 24-26CBM 40 pies GP:12032milímetros(Longitud)x2352mm(Ancho)x2393mm(Alto) 54CBM 40 pies HC:12032milímetros(Longitud)x2352mm(Ancho)x2698mm(Alto) 68CBM
Servicios adicionales	Soldadura/punzonado/corte/doblado/desenrollado
Detalles del paquete	Paquete estándar marinero(protegido por papel impermeable,envuelto en lámina de hierro, fijado por barras de acero)

Descripción

1/4 stainless steel rod refers to a small diameter stainless steel round bar commonly used in precision components, sujetadores, pins, dispositivos médicos, and small mechanical parts. Due to its small size, the processing and cutting of 1/4 inch stainless steel rod require higher precision control compared with larger bars, especially in terms of deformation, burr control, y precisión dimensional.

Common Processing Methods for Stainless Steel Rod

Cold cutting: used for short length cutting with good dimensional accuracy
Band saw cutting: suitable for batch production and medium precision requirements
Abrasive wheel cutting: high efficiency but may generate heat and burrs
Corte por láser: used for high precision and complex requirements
Mecanizado CNC: for precision parts after cutting into blanks

Challenges in Cutting Small Diameter Rod

Because 1/4 inch stainless steel rod has a small cross-section, it is more sensitive to cutting force and heat, which can easily cause deformation or surface defects if not properly controlled.

Risk of bending during clamping and cutting
Burr formation at cut edges
Heat buildup affecting surface quality
Dimensional deviation due to vibration

Precision Control in Cutting Process

Use of high-precision fixtures to prevent bending
Sharp cutting tools to reduce burr formation
Controlled feed rate to avoid vibration
Cooling or lubrication during cutting
Post-cut deburring and surface finishing

Common Finishing After Cutting

Deburring to remove sharp edges
Polishing for improved surface smoothness
Grinding for tighter dimensional accuracy
Passivation to improve corrosion resistance

Aplicaciones típicas

Precision pins and shafts
Fasteners and screws
Medical and dental components
Electronic and sensor parts
Small mechanical assemblies

Servicios de procesamiento disponibles

Stainless steel rod se puede suministrar con corte, alisar, pulido, mecanizado, and custom length services according to customer requirements.

Preguntas frecuentes

1. Qué es 1/4 varilla de acero inoxidable utilizada para?

It is mainly used for small precision parts, sujetadores, and mechanical components.

2. What is the best cutting method?

Band saw and cold cutting are commonly used for stable accuracy.

3. Why does small rod deform easily during cutting?

Because the small diameter has low rigidity and is sensitive to clamping force.

4. How to reduce burrs after cutting?

Use sharp tools and perform deburring or polishing after cutting.

5. Can stainless steel rod be CNC machined?

Sí, after cutting into blanks, it is widely used in CNC machining.

17 Proveedor de años de experiencia exportadora
Inventario suficiente | Fábrica de procesamiento

Establecimiento de nuestra empresa: La exportación comenzó en 2006, con 18 años de experiencia exportadora; Exportado a más 100 países, con más 800 clientes acumulados. Inventario de almacén: Arriba a 20,000 montones