Клетчатая пластина из нержавеющей стали
Checkered plate stainless steel is available in a wide range of standard sizes, typically from 1000 мм до 1500 mm in width and up to 6000 mm in length, with thickness options from 2 mm to over 10 мм.
- Описание
Checkered plate stainless steel is a textured stainless steel sheet with raised patterns such as diamond or checker designs. It is widely used for anti-slip flooring, ступеньки лестницы, пандусы, and industrial platforms due to its combination of strength, долговечность, и коррозионная стойкость.
Общий диапазон толщины
The thickness of checkered stainless steel plate is one of the most important specifications, as it determines load capacity and application type.
- Light-duty applications: 2.0 мм – 3.0 мм
- Standard industrial use: 3.0 мм – 6.0 мм
- Heavy-duty flooring: 6.0 мм – 10.0 мм
- Special structural applications: above 10.0 мм (less common)
Стандартные размеры листов
Checkered stainless steel plates are typically supplied in standard sheet dimensions for easy fabrication and transportation.
Common Width and Length
- 1000 мм × 2000 мм
- 1219 мм × 2438 мм (4 фут × 8 футы)
- 1500 мм × 3000 мм
- 1500 мм × 6000 мм
Custom cutting sizes are also widely available based on project requirements.
Pattern Specifications
Different checkered patterns also influence usability and application performance.
- Diamond pattern: most common industrial standard
- Five-bar pattern: high slip resistance for heavy-duty use
- Small checker pattern: lighter applications and decorative use
- Customized embossing patterns: architectural or special design needs
Material Grades Commonly Used
Checkered stainless steel plates are typically produced in standard austenitic grades:
- 304: general-purpose, хорошая коррозионная стойкость
- 304л: улучшенная свариваемость
- 316: higher corrosion resistance, suitable for marine environments
- 316л: low carbon version for enhanced corrosion performance
Варианты отделки поверхности
- Mill finish (standard industrial surface)
- Матовая отделка (uniform directional texture)
- Полированная отделка (improved appearance for architectural use)
Tolerance and Fabrication Standards
- Thickness tolerance depends on production process (hot rolled or embossed)
- Flatness varies based on pattern depth
- Edges can be supplied as mill edge or cut edge
- Suitable for cutting, сварка, изгиб, и формирование
