NOTA
Nota 430 aço inoxidável (UNS S43000, EM 1.4016) is the most widely used family of Ferritic alloys. It’s also one of the widely used “non-hardenable” stainless with good physical and mechanical characteristics, about three-quarters the ductility of low carbon strip and inferior to chrome-nickel grades; cost less than chromium-nickel stainless steels. It is known for its good corrosion resistance to numerous substances, excellent stress, e conformabilidade, coupled with practical mechanical properties.
430 stainless steel is magnetic stainless steel in the annealed condition. It can be formed using a large variety of roll forming or mild stretch-bending operations, as well as the more common drawing and bending processes.
The steel has limited weldability and should not be used in the as-welded condition for dynamic or impact loaded structures. It has excellent resistance to citric and nitric acid, sulfur gases; slightly less corrosion and heat resistance than grade 301, 302, e 304, can be used in certain chemical applications.
PROPERTIES
- Boa resistência à corrosão e oxidação
- Can be readily fabricated by cold working
- Excelente formabilidade
- Low costs
- Magnético
- Thermal conductivity and finish quality
CHEMICAL COMPOSITION AND PHYSICAL PROPERTIES FOR 430
| Item | C% | Si% | Mn% | P% | S% | Ni% | Cr% | N% | Outros |
|---|---|---|---|---|---|---|---|---|---|
| Mínimo | — | — | — | — | — | — | 16.00 | — | — |
| Máx. | 0.12 | 0.75 | 1.00 | 0.040 | 0.030 | 0.60 | 18.00 | — | — |
| Item | Tensile Test | Teste de dureza | Bend Test | ||||
|---|---|---|---|---|---|---|---|
| 0.2%Sim.. | 1%Sim.. | T.S. | ELE (%) | HRB | Alta tensão | 180∘ | |
| Mínimo | 205 | — | 420 | 22 | — | — | |
| Máx. | N/mm2 | — | N/mm2 | — | 88 | 200 | 1.0t |
APPLICATION
- Linings for dish washers
- Refrigerator cabinet panels
- Acabamento automotivo
- Lashing wire
- Element Supports
- Stove trim rings
- Fixadores
- Chimney liners
- Repetition machined components
SPECIFICATIONS
- JIS G4305 – Cold-rolled Stainless Steel Plate, Sheet and Strip
- EM 10088-2 (1.4016) – Stainless Steel Technical delivery conditions for sheet, plate and strip of corrosion resisting steels for general purposes
RAW MATERIAL FINISHS & TAMANHOS DISPONÍVEIS
| 2D | A uniform, dull silver gray finish, which results from cold rolling followed by annealing and descaling. | |||||
|---|---|---|---|---|---|---|
| Faixa | 914 (3′) | 1000 | 1219 (4′) | 1250 | 1500 | 1524 (5′) |
| 0.3mm ~ 3.0mm | ◇ | ◆ | ◆ | ◆ | ◆ | ◆ |
| 30GA ~ 11GA | ◇ | ◆ | ◆ | ◆ | ◆ | ◆ |
| 0.012″ ~ 0.1196″ | ◇ | ◆ | ◆ | ◆ | ◆ | ◆ |
| 2B (Mill Finish) |
Um brilhante, cold-rolled finish resulting in the same manner as 2D finish, except that the annealed and descaled sheet received a final light roll pass through polished rolls. This is the general-purpose cold-rolled finish that can be used, or a preliminary step to polishing. | |||||
| Faixa | 914 (3′) | 1000 | 1219 (4′) | 1250 | 1500 | 1524 (5′) |
| 0.3mm ~ 3.0mm | ◇ | ◆ | ◆ | ◆ | ◆ | ◆ |
| 30GA ~ 11GA | ◇ | ◆ | ◆ | ◆ | ◆ | ◆ |
| 0.012″ ~ 0.1196″ | ◇ | ◆ | ◆ | ◆ | ◆ | ◆ |
| BA (Bright Anneal) |
A highly reflective, mirror like finish, which was produced by bright annealing under Oxygen-free atmospheric conditions following cold rolling using polished rolls. | |||||
| Faixa | 914 (3′) | 1000 | 1219 (4′) | 1250 | 1500 | 1524 (5′) |
| 0.3mm ~ 2.0mm | ◇ | ◆ | ◆ | ◆ | ||
| 30GA ~ 14GA | ◇ | ◆ | ◆ | ◆ | ||
| 0.012″ ~ 0.0747″ | ◇ | ◆ | ◆ | ◆ | ||
