1 4 스테인레스 스틸 막대
| 기준 | ASTM,아이시,그들의,그,안에,에서,학사,GB |
| 모양 | 둥근, 정사각형, 구형 |
| 등급 | 201/202/304/309/309S/310/310S/304/304L/ 316/316L/316Ti/410/420/430 |
| 지름 | 1mm-300mm 또는 필요에 따라 |
| 길이 | 필요에 따라 |
| 컨테이너 크기 | 20피트 GP:5898mm(길이)x2352mm(너비)x2393mm(높은) 24-26CBM 40피트 GP:12032mm(길이)x2352mm(너비)x2393mm(높은) 54CBM 40피트 HC:12032mm(길이)x2352mm(너비)x2698mm(높은) 68CBM |
| 추가적인 서비스 | 용접/펀칭/절단/벤딩/디코일링 |
| 패키지 세부정보 | 표준 항해에 적합한 패키지(방수 종이로 보호,철판에 싸서, 강철 막대로 고정) |
- 설명
1/4 stainless steel rod refers to a small diameter stainless steel round bar commonly used in precision components, 패스너, 다리, 의료기기, and small mechanical parts. Due to its small size, the processing and cutting of 1/4 inch stainless steel rod require higher precision control compared with larger bars, especially in terms of deformation, burr control, 및 치수 정확도.
Common Processing Methods for Stainless Steel Rod
- Cold cutting: used for short length cutting with good dimensional accuracy
- Band saw cutting: suitable for batch production and medium precision requirements
- Abrasive wheel cutting: high efficiency but may generate heat and burrs
- 레이저 절단: used for high precision and complex requirements
- CNC 가공: for precision parts after cutting into blanks
Challenges in Cutting Small Diameter Rod
왜냐하면 1/4 inch stainless steel rod has a small cross-section, it is more sensitive to cutting force and heat, which can easily cause deformation or surface defects if not properly controlled.
- Risk of bending during clamping and cutting
- Burr formation at cut edges
- Heat buildup affecting surface quality
- Dimensional deviation due to vibration
Precision Control in Cutting Process
- Use of high-precision fixtures to prevent bending
- Sharp cutting tools to reduce burr formation
- Controlled feed rate to avoid vibration
- Cooling or lubrication during cutting
- Post-cut deburring and surface finishing
Common Finishing After Cutting
- Deburring to remove sharp edges
- Polishing for improved surface smoothness
- Grinding for tighter dimensional accuracy
- Passivation to improve corrosion resistance
일반적인 응용 분야
- Precision pins and shafts
- Fasteners and screws
- Medical and dental components
- Electronic and sensor parts
- Small mechanical assemblies
이용 가능한 처리 서비스
스테인레스 스틸 막대 절단하여 공급할 수 있습니다., straightening, 세련, 가공, and custom length services according to customer requirements.
자주하는 질문
1. 무엇인가요 1/4 스테인레스 막대에 사용되는?
It is mainly used for small precision parts, 패스너, and mechanical components.
2. What is the best cutting method?
Band saw and cold cutting are commonly used for stable accuracy.
3. Why does small rod deform easily during cutting?
Because the small diameter has low rigidity and is sensitive to clamping force.
4. How to reduce burrs after cutting?
Use sharp tools and perform deburring or polishing after cutting.
5. Can stainless steel rod be CNC machined?
예, after cutting into blanks, it is widely used in CNC machining.
17 수년간의 수출 경험 공급 업체
충분한 재고 | 가공공장
우리 회사 설립: 내보내기 시작 날짜 2006, ~와 함께 18 수년간의 수출 경험; 이상으로 수출됨 100 국가, 이상으로 800 누적고객.창고재고: 최대 20,000 톤
자체 철강 가공 공장
우리는 유통업체나 도매업체를 찾고 있습니다.
우리는 고품질의 고객과 장기적인 사업을 하기를 희망합니다.
잘 공급하려면 고품질 공급업체가 필요한 것처럼
빠른 배송 스테인리스 스틸 공급 업체
스테인레스 스틸의 표준 항해 패키지
번들 패키지; 나무 케이스,나무 팔레트 패키지; 컨테이너 또는 대량; 고객 요청에 따라 특별
