Acciaio inossidabile 304 Barra tonda per metallo da costruzione-Teda Ganghua

Stainless steel round bars for industrial engineering

fornitore di barre in acciaio inossidabile

Fornitore di barre in acciaio inossidabile di grande diametro

Fornitore di barre esagonali in acciaio inossidabile

Barre rotonde in acciaio inossidabile per ingegneria industriale

1 4 Asta in acciaio inossidabile

Standard	ASTM,AISI,LORO,LUI,IN,DA,Che cavolo,GB
Forma	Girare, Piazza, Rettangolo
Grado	201/202/304/309/309S/310/310S/304/304L/ 316/316L/316Ti/410/420/430
Diametro	1mm-300mm o come richiesto
Lunghezza	Come richiesto
Dimensioni del contenitore	20ft GP:5898mm(Lunghezza)x2352 mm(Larghezza)x2393 mm(Alto) 24-26CBM 40 piedi GP:12032mm(Lunghezza)x2352 mm(Larghezza)x2393 mm(Alto) 54CBM 40 piedi HC:12032mm(Lunghezza)x2352 mm(Larghezza)x2698mm(Alto) 68CBM
Servizi aggiuntivi	Saldatura/Punzonatura/Taglio/Piegatura/Srotolamento
Dettagli del pacchetto	Pacchetto standard per la navigazione(protetto da carta impermeabile,avvolto in lamiera di ferro, fissato da barre d'acciaio)

Descrizione

1/4 stainless steel rod refers to a small diameter stainless steel round bar commonly used in precision components, elementi di fissaggio, perni, dispositivi medici, and small mechanical parts. Due to its small size, the processing and cutting of 1/4 inch stainless steel rod require higher precision control compared with larger bars, especially in terms of deformation, burr control, e precisione dimensionale.

Common Processing Methods for Stainless Steel Rod

Cold cutting: used for short length cutting with good dimensional accuracy
Band saw cutting: suitable for batch production and medium precision requirements
Abrasive wheel cutting: high efficiency but may generate heat and burrs
Taglio laser: used for high precision and complex requirements
Lavorazione CNC: for precision parts after cutting into blanks

Challenges in Cutting Small Diameter Rod

Perché 1/4 inch stainless steel rod has a small cross-section, it is more sensitive to cutting force and heat, which can easily cause deformation or surface defects if not properly controlled.

Risk of bending during clamping and cutting
Burr formation at cut edges
Heat buildup affecting surface quality
Dimensional deviation due to vibration

Precision Control in Cutting Process

Use of high-precision fixtures to prevent bending
Sharp cutting tools to reduce burr formation
Controlled feed rate to avoid vibration
Cooling or lubrication during cutting
Post-cut deburring and surface finishing

Common Finishing After Cutting

Deburring to remove sharp edges
Polishing for improved surface smoothness
Grinding for tighter dimensional accuracy
Passivation to improve corrosion resistance

Applicazioni tipiche

Precision pins and shafts
Fasteners and screws
Medical and dental components
Electronic and sensor parts
Small mechanical assemblies

Servizi di elaborazione disponibili

Stainless steel rod può essere fornito con taglio, raddrizzamento, lucidatura, lavorazione, and custom length services according to customer requirements.

Domande frequenti

1. Cosa è 1/4 stainless steel rod used for?

It is mainly used for small precision parts, elementi di fissaggio, and mechanical components.

2. What is the best cutting method?

Band saw and cold cutting are commonly used for stable accuracy.

3. Why does small rod deform easily during cutting?

Because the small diameter has low rigidity and is sensitive to clamping force.

4. How to reduce burrs after cutting?

Use sharp tools and perform deburring or polishing after cutting.

5. Can stainless steel rod be CNC machined?

SÌ, after cutting into blanks, it is widely used in CNC machining.

17 Anni di esperienza nel settore dell'esportazione
Inventario sufficiente | Fabbrica di trasformazione

La nostra fondazione aziendale: L'esportazione è iniziata nel 2006, con 18 anni di esperienza nell'esportazione; Esportato in oltre 100 Paesi, con oltre 800 clienti cumulativi. Inventario di magazzino: Fino a 20,000 tonnellate