ورقة سميكة من الفولاذ المقاوم للصدأ

ورقة سميكة من الفولاذ المقاوم للصدأ

Thick stainless steel sheets cover a wide range of specifications from medium plates around 3 mm to extra heavy plates above 100 سمك مم. These materials are widely used in heavy industrial and structural applications where strength, مقاومة التآكل, and durability are required.

Common grades such as 304, 316, and duplex stainless steels are available in various thicknesses and dimensions, allowing stainless steel plates to meet diverse engineering and fabrication requirements.

وصف

Thick stainless steel sheet refers to medium and heavy gauge stainless steel plates used in structural engineering, المعدات الصناعية, أوعية الضغط, بناء السفن, تصنيع الآلات, and heavy fabrication industries. Compared with thin stainless steel sheets, thick plates provide higher strength, قدرة تحمل أفضل, وتحسين الاستقرار الهيكلي.

The definition of “thick” stainless steel sheet varies by industry, but materials above approximately 3 mm thickness are generally classified as medium or thick stainless steel plates.

1. Common Thickness Range of Stainless Steel Sheets and Plates

Category	نطاق السماكة	Typical Application
Thin Stainless Steel Sheet	0.3 مم - 3 مم	Decoration, معدات المطبخ, precision fabrication
Medium Thickness Plate	3 مم - 20 مم	التصنيع الهيكلي, الدبابات, الآلات
Thick Stainless Steel Plate	20 مم - 60 مم	Heavy industry, أوعية الضغط
Extra Thick Stainless Steel Plate	60 مم وما فوق	في الخارج, بناء السفن, heavy engineering

2. Common Standard Thickness Specifications

The following thicknesses are commonly available in international stainless steel markets:

Thin to Medium Thickness

1 مم
1.5 مم
2 مم
3 مم
4 مم
5 مم
6 مم

Medium to Heavy Thickness

8 مم
10 مم
12 مم
14 مم
16 مم
20 مم
25 مم

Heavy Plate Thickness

30 مم
40 مم
50 مم
60 مم
80 مم
100 مم وما فوق

3. مواصفات العرض والطول المشتركة

Thick stainless steel sheets are typically supplied in standard plate dimensions.

عرض	الطول المشترك
1000 مم	2000 مم
1219 مم	2438 مم
1500 مم	3000 مم
1800 مم	6000 مم
2000 مم	6000 مم

Custom cutting and processing sizes are also common in industrial applications.

4. Hot Rolled vs Cold Rolled Thickness Range

Cold Rolled Stainless Steel

Usually produced from 0.3 مم ل 6 مم
Better surface finish and dimensional accuracy
Common surface finishes: 2ب, بكالوريوس, نحى

Hot Rolled Stainless Steel

Commonly produced above 3 سمك مم
Suitable for heavy plates and structural applications
Typical surface finish: تشطيب رقم 1

Thicker stainless steel plates are generally manufactured using hot rolling processes.

5. Common Stainless Steel Grades for Thick Plates

درجة	Main Characteristics
304	مقاومة التآكل العامة
304ل	قابلية لحام أفضل
316	تحسين مقاومة الكلوريد
316ل	منخفض الكربون, chemical applications
310س	مقاومة درجات الحرارة العالية
2205 دوبلكس	High strength and corrosion resistance