إرشادات للتعامل مع الأجزاء المصنوعة من الفولاذ المقاوم للصدأ

إرشادات للتعامل مع الأجزاء المصنوعة من الفولاذ المقاوم للصدأ

Storage

• Designated Storage: استخدم رفوف تخزين خاصة مصنوعة من الخشب, الفولاذ الكربوني المطلي, or rubber pads to prevent contact with other metals.
• Isolation: Store stainless steel separately from other materials. The area should be convenient for lifting and protected from dust, زيت, and rust.

Lifting

• Special Equipment: Use lifting belts and special chucks. Avoid wire ropes to prevent surface scratches.
• Careful Handling: Prevent impact and collision to avoid scratches during lifting and placement.

مواصلات

• Clean Tools: Use clean transportation tools such as trolleys or battery cars with protective measures to prevent contamination.
• Avoid Dragging: Dragging is prohibited to prevent bumps and scratches.

يعالج

Processing Area

• Fixed Area: Use a dedicated area for processing stainless steel. Lay rubber pads on platforms to prevent damage.
• Clean Environment: Maintain a clean and organized processing area to avoid contamination.

قطع

• Isolation: Isolate stainless steel from feeding brackets and cover drop hoppers with rubber pads.
• Post-Cutting Cleanup: Remove cutting slag immediately after plasma cutting to prevent contamination.
• Sawing Protection: Use rubber clamping during sawing and clean oil and residue afterward.

Mechanical Processing

• حماية السطح: Protect stainless steel during machining operations like turning and milling. Clean the surface of oil and debris after processing.

تشكيل

• Prevent Scratches: Use effective measures to avoid scratches and creases during rolling and bending.

لحام

Riveting Welding

• Avoid Forced Assembly: Do not use flame baking or force during assembly. If plasma cutting is necessary, isolate parts to prevent contamination.
• Post-Cutting Cleanup: Clean cutting slag from workpieces immediately.

لحام

• Pre-Weld Cleaning: Wipe off oil, rust, and dust before welding.
• Argon Arc Welding: Use argon arc welding when possible. If manual arc welding is used, employ small currents and quick welding to avoid swinging.
• Arc Control: Do not strike arcs in non-welding areas. Ensure proper ground wire placement.
• Anti-Splash Measures: Implement measures like brushing white ash to prevent splashes. Clean slag and splashes thoroughly after welding.

Multi-Layer Welding

• Clean Between Layers: Ensure slag is cleaned between each layer. Control interlayer temperature, keeping it below 60°C.

Weld Quality

• Smooth Transition: Weld joints should be polished and free from defects. Ensure a smooth transition between the weld and base material.

Correction

• Avoid Flame Heating: Do not use flame heating, especially repeated heating in the same area.
• Mechanical Correction: استخدم الأجهزة الميكانيكية أو المطرقة بمطرقة خشبية أو مطاطية لتجنب التلف. المطارق الحديدية محظورة.